Filter
Top Products
Getting Started
7
GB
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
1 Press ?/1 to turn on the system.
2 Press c/CLOCK SET (or CLOCK/
TIMER SET on the remote).
3 Press M/m repeatedly to set the hour.
4 Press ENTER.
5 Press M/m repeatedly to set the
minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press c/CLOCK SET (or CLOCK/TIMER
SET on the remote).
2 Press M/m to select “CLOCK SET”, then
press ENTER.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 21).
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1 Make sure that all discs removed from the
system.
2 Press FUNCTION repeatedly until “CD”
appears.
3 Hold down EDIT and ?/1 until “LOCK”
appears.
4 Unplug the power cord.
Setting the clock