Filter
Top Products
10
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 14).
Using the display window
1 Press FUNCTION repeatedly until “CD”
appears, then load a disc.
2 Press PLAY MODE in stop mode
repeatedly until “PROGRAM” appears.
3 Press one of DISC 1 – 5 or DISC SKIP to
select a disc.
4 Press . or > repeatedly until the
desired track number appears.
5 Press PLAY MODE once.
The track is programmed.
First the programmed playing order and
“STEP” appear, then the total playing time
appears.
6 Program additional discs or tracks.
7 Press NX (or CD N on the remote).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
NX (or CD N on the remote).
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Creating your own
program
— Program Play
To program Repeat steps
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To Do this
Cancel Program
Play
Press PLAY MODE repeatedly
until “PROGRAM”, “ALL
DISCS SHUFFLE” or “1 DISC
SHUFFLE” disappears.
Clear a track from
the end
Press CLEAR on the remote in
stop mode.
Add a track to the
end of the program
in stop mode
Perform step 3 to 5.