Sony RCD-W500C CD Player User Manual


 
38
Troubleshooting
If you experience any of the following
difficulties while using the unit, use this
troubleshooting guide to help you remedy the
problem.
DECK A (the CD player
section)
The player does not start playing.
Insert a disc.
Place the disc properly.
Clean the disc (page 4).
Place the disc with the label side up.
Moisture condensation has formed inside the
unit. Take the disc out and leave the unit turned
on for about an hour until the moisture
evaporates (page 4).
Press POWER to turn the unit on.
DECK A (MP3 playback)
MP3 files cannot be played back.
You cannot play MP3 files on DECK B.
Recording was not performed according to the
ISO 9660 level 1 or level 2 format, or the Joliet
or Romeo in the expansion format.
The file extension “.MP3” is not added to the file
name.
Files are not stored in MP3 format.
MP3 files take longer to play back than others.
The following discs take a longer time to start
playback.
–a disc recorded with complicated tree structure.
–a disc recorded in Multi Session.
–a disc to which data can be added (non-
finalized disc).
System Limitations
“TOC Reading” appears in the
display for a long time
Regardless of the disc, “TOC Reading” appears in the
display of DECK B longer than in that of DECK A.
This is because, DECK B is a CD-R/RW writer and
reads various version information while setting
optimum recording condition.
Limitations when recording over an
existing track
The correct remaining recording time may not be
displayed.
The remaining recording time may be inaccurately
displayed relative to the total recorded time.
You can record up to 99 tracks.
Note
When you turn on the unit, you will hear some
mechanical noise from the unit. This is not a
malfunction.