Filter
Top Products
12
Tips
• The function of AMS control changes according to
the ALBUM SELECT indicator in the display. When
the indicator is off, the AMS control selects tracks.
When the indicator lights up, the AMS control
selects albums. Press ALBUM to turn the ALBUM
SELECT indicator on or off.
• You can start playing from a specific track in step 7.
1 Turn AMS while the ALBUM SELECT indicator
in the display is turned off (or press ./> or
the number buttons on the remote) to select the
track you want to play (see “Using the Display”
on page 13 for details about the displayed
information).
2 Press H.
• You can remove or load discs while playing the
other deck. Press OPEN/CLOSE (or A) of the deck
that is not currently playing to open that tray, and
remove or load a disc.
• The DISC 1-5 button indicator lights orange when
the disc is in the tray. The indicator lights to green
when the disc is selected (RCD-W500C only).
• You can connect a headphone to the PHONES jack
on the front panel. Turn the PHONE LEVEL
control to adjust the volume.
• You can replace any discs in the other disc trays
while playing a disc in DECK A of RCD-W500C.
Press A of the deck that is not currently playing to
open that tray, and remove or load a disc (Ex-
Change function).
Notes
• You can play unfinalized CD-Rs or CD-RWs only
in DECK B. For the detailed explanation about
finalizing, see “Finalizing a CD-R or CD-RW” on
page 29.
• Be sure to close the disc trays when the unit is not
in use to prevent dust and dirt from entering and
prevent damage to the disc tray.
• When you turn on the unit, you will hear some
mechanical noise from the unit. This is not a
malfunction.
• You may not be able to play certain MP3 files.
• “0:00” appears when skipping a portion of ID3
ver.2 tag. The skipping time depends on the size of
the ID3 ver.2 tag.
To
Stop playback
Pause playing
Select the disc
(for DECK A of
RCD-W500C)
Go to the next disc
(for DECK A of
RCD-W500C) Z
Go to the next
track
Go to the beginning
of the current track
or the preceding
track
Go to the next album
Go back to the
preceding album
Remove the disc
* AMS: Automatic Music Sensor
Do the following:
Press x.
Press X. Press the button again or
press H to resume playing.
Press one of the DISC 1-5 buttons.
Press DISC SKIP on the remote.
Turn AMS* clockwise while the
ALBUM SELECT indicator in the
display is turned off (or press >
on the remote ).
Turn AMS counterclockwise while
the ALBUM SELECT indicator in
the display is turned off (or press
. on the remote).
Turn AMS clockwise while the
ALBUM SELECT indicator in the
display is turned on (or press
ALBUM + on the remote).
Turn AMS counterclockwise while
the ALBUM SELECT indicator in
the display is turned on (or press
ALBUM – on the remote).
Press OPEN/CLOSE (or A),
whichever contains the disc you
want to remove after stopping play.