Filter
Top Products
Additional Information
35
Additional Information
Using the Setup Menu
You can make various settings on this unit by
using the Setup Menu.
When using the remote, set DECK A/DECK B
to DECK B.
1 Press MENU/NO.
2 Turn AMS (or press ./> on the
remote) to select the setup item, and
press AMS (or YES).
3 Turn AMS (or press ./> on the
remote) to set the item, and press AMS
(or YES).
4 Press MENU/NO.
To initialize an item’s parameter
Press CLEAR after step 2.
Notes
• The menus you can use while the unit is stopped,
playing, or recording differ.
• The setting is stored in memory even if you turn off
the unit or disconnect the power.
AMS
YES
CLEAR
MENU/NO
DECK A/DECK B
YES
CLEAR
MENU/NO
./>
Menu items
Setup item Function (reference page) Parameters (Initial setting)
Make Disc Sets whether Make-Disc Synchro-Recording is performed On/Off (Off)
when using the CD SYNCHRO NORMAL or CD SYNCHRO
HIGH buttons (page 22).
DECK A Lvl Adjusts the input level from DECK A (page 27). – ∞ dB to +18 dB (0.0 dB)
Optical Lvl Adjusts the input level from the DIGITAL OPTICAL IN jack – ∞ dB to +18 dB (0.0 dB)
(page 27).
Track Mark Sets the Track Marking Function (page 28). LSync/Off (LSync)
LSync Lvl Changes the trigger level for Track Marking Function (page 28). –72 dB to –20 dB in 2 dB
increments (–50 dB)
Silent Pause Sets the Silent Pause Function (page 34). On/Off (On)
Direct Sets the Direct Recording Function (page 34). On/Off (Off)
Post Gap Sets the function to add Post Gap (page 34). On/Off (Off)