Filter
Top Products
24
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A AUDIO IN jack
Use audio cords (not supplied) to connect an
optional analog component (Portable Audio
Player, etc.) to this jack. You can then record or
listen to the sound from the component through
this system.
Notes
• Before connecting or disconnecting the audio cord
(not supplied), press VOLUME – repeatedly (or turn
the VOLUME control on the unit counterclockwise)
to turn down the volume.
• Disconnect the audio cords when not using optional
components.
Listening to audio from a
connected component
1
Connect the audio cords.
See “Hooking up optional components”.
2 Press FUNCTION repeatedly until “AUDIO
IN” appears.
Start playing the connected component.
Recording audio from a
connected component
1
Connect the audio cords.
2 Start recording manually.
See “Recording on a tape manually” on
page 18.
Notes
• If the connected component has the AVLS
(Automatic Volume Limiter System) function, be
sure to turn off the function when using the AUDIO
IN. Otherwise, you will have to turn up the volume
of the speaker, and that may cause distortion.
• If the connected component has the BASS BOOST
or MEGA BASS function, be sure to turn off the
function when using the AUDIO IN. Otherwise, the
sound from the speaker may be distorted.
Optional Components
Hooking up optional components
Optional analog component
From the audio output
jacks of an optional
analog component
Stereo mini-plug