Filter
Top Products
22
GB
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Clock display* y No display (Power Saving
Mode)
* The clock is displayed only if you set the clock.
Note
You cannot set the clock in Power Saving Mode.
Tips
• STANDBY indicator lights up even in Power Saving
Mode.
• The timer continues to operate in Power Saving
Mode.
You can check the playing time and remaining
time of the current track or that of the disc.
When a disc with MP3 audio tracks is loaded,
you can also check the information recorded on
disc, such as the titles and the artist’s names.
Checking the remaining time
and titles
Press DISPLAY repeatedly during Normal
Play.
Each time you press the button, the display
changes cyclically as follows:
Current track number and elapsed playing time
t Current track number and remaining time or
“– –.– –”
1)
t Remaining time of the disc or
“– –.– –”
1)
t Track title and the artist name
(disc with MP3 audio tracks
2)
only) t Album
name
2)
t Clock display (for eight seconds)
1)
“– –.– –” appears when you select a CD track whose
number is 21 or over, or when you select an MP3
audio track.
2)
When you play back a track with an ID3 tag ver. 1
or ver. 2, the ID3 tag appears. The ID3 tag displays
the track title, the artist name and the album name
information.
Display
Turning off the display
— Power Saving Mode
Viewing information about
the disc in the display