Filter
Top Products
4
Getting Started
Step 1: Hooking up the system
Follow steps 1 through 6 of the procedure below to hook up your system using the supplied cords and
accessories.
The speaker grille design differs somewhat from that of the U.S. and other models.
The U.S. model is used here for illustration purposes.
1 Remove the rear cover.
U
Push in on the tabs, pull downward,
and then lift off
2 Connect the speakers.
1 Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
3
L
#
#
R
3
Note
Keep the speaker cords away from the
antennas to prevent noise.
U
3
41
2
5
6
Right speaker
Left speaker
Rear cover
Gray (3)
Black (#)
Insert this
portion