Filter
Top Products
22
Tips
• The program you made remains in the system’s
memory until you turn off the system or remove the
CD. After the program finishes, press CD H to
play the program again.
• When the total playing time of the programmed
tracks exceeds 100 minutes, “- - . - -” appears in the
display.
• If you try to program more than 24 tracks, “FULL”
appears in the display.
Do steps 3 and 4 with
Program Play stopped.
Erase the entire
program
Press s with Program Play
stopped.
Add a track to the
end of the program
Playing CD tracks in a
favorite order
–– Program Play
You can make a program of up to 24 tracks on a
CD in any order that you want.
nx
?/1
N
+
–
1
2
6
s
3
4
1 Press FUNCTION on the unit
repeatedly until “CD” appears.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears.
3 Press l or L repeatedly until the
desired track number appears.
3 243
4 Press ENTER.
The selected track is programmed. The
number of the selection just programmed
appears, followed by the total playing time of
the program.
5 To program additional tracks, repeat
steps 3 and 4.
6 Press CD H.
Program Play starts. The tracks play in the
order that they were programmed.
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM” disappears.
To Do this
Total
playing
time
Selected
track
number