Filter
Top Products
6
Step 2: Setting the time
Before you can use the system’s timer functions,
set the internal clock.
The clock uses a 24-hour system on the European
model, and a 12-hour system on other models.
The 24-hour system is used here for illustration
purposes.
3,5
1
2,4
1 Press TIMER SET.
The hour indication flashes.
000
2 Press l/L repeatedly to set the
hour.
1300
3 Press ENTER.
The minute indication flashes.
1300
4 Press l/L repeatedly to set the
minute.
1310
5 Press ENTER.
The clock starts working.
To reset the system clock
You can reset the system clock when the system is
on.
1 Press TIMER SET.
2 Press l/L repeatedly until
“SET CLOCK” appears, then press ENTER.
3 Repeat step 2 to 5 in “Step 2: Setting the time”.
Tip
If you make a mistake, start over from step 1.