Filter
Top Products
Other operations40
GB
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
MY DW VOA BBC OTH
VWX
8
YZ
9
<>
/
FM/
AM
ON/
OFF
POWER
0
ab
DISPLAY
AM BAND
LABEL EDIT
TIME SET
HOLD
LOCAL/
WORLD
TIMERSTANDBY/
STANDBY TIME SET
STANDBY MEMORY
TIME SET
TIME DIFF
SW STATION CALL
JOG/
TUNE/
SCAN˚
DIRECT
ENTER
DST
ERASE
SLEEP
LIGHT
SYNC
SSB
EXE
POWER
ON/OFF
ERASE
STANDBY
MEMORY
a/b
To wake up to the buzzer
If a STANDBY MEMORY without a frequency preset is activated, the
buzzer sounds at the standby time. Erase if a frequency is preset.
1 Press POWER ON/OFF to turn on the radio.
2 Press STANDBY MEMORY a or b.
The preset frequency is recalled.
If no frequency is stored, a beep sounds and ”MEMORY”
”EMPTY” appears in the display. Go to step 4.
3 Hold down ERASE.
The Standby Memory number flashes in the display while ERASE
is held down.
A beep sounds after 3 seconds and the station assigned to the
STANDBY MEMORY button is erased. The Standby Memory
number and the Standby Memory label disappear.
4 Follow steps 4 to 6 of ”Waking up to the radio or
buzzer”, page 38 to set the standby time (i.e., the time
the buzzer is to sound).
The buzzer sounds at the standby time.
To stop the buzzer
Press any button except LIGHT.
The buzzer stops after about 60 minutes if it is left on.
Notes
• The buzzer volume cannot be adjusted with VOL.
• The Standby Memory buzzer sounds regardless of the BEEP OFF
setting.
• When a Standby Memory preset is erased, any changes to its default
label is erased as well.