Filter
Top Products
27
GB
Listening to the radio
Listening to the radio
Various ways of reception (continued)
MY-Memory tuning
Preset up to 100 frequencies of any band (FM, SW, MW or LW) to the MY
button. You can scan these stations or tune in one by one.
Presetting stations to MY-Memory
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
MY DW VOA BBC OTH
VWX
8
YZ
9
<>
/
FM/
AM
ON/
OFF
POWER
0
ab
DISPLAY
AM BAND
LABEL EDIT
TIME SET
HOLD
LOCAL/
WORLD
TIMERSTANDBY/
STANDBY TIME SET
STANDBY MEMORY
TIME SET
TIME DIFF
SW STATION CALL
JOG/
TUNE/
SCAN˚
DIRECT
ENTER
DST
ERASE
SLEEP
LIGHT
SYNC
SSB
EXE
POWER
ON/OFF
ENTER
FM/AM
MY
1 Press POWER ON/OFF to turn on the radio.
2 Tune in to the station you want to preset.
3 Hold down ENTER and press MY.
When ENTER is held down, “PRESET MY” will flash in the
display.
A beep sounds when MY is pressed.
The station is stored to the lowest
available MY-Memory number (00 to
99). The MY-Memory number and the
MY-Memory label are displayed.
Default MY-Memory labels
Each time a station is stored to MY-Memory, it is assigned the
default MY-Memory label ”MY-xx” (with the memory number in
place of ”xx”) .
To change labels, see ”Editing labels”, page 36.
Note
The radio may have frequencies stored in MY-Memory at factory
shipment. In this case, erase them before presetting stations to MY-
Memory (see ”Erasing a MY-Memory preset”, page 29).
Tips
• If you press MY with all the MY-Memory numbers (00 to 99) assigned
a station, a beep sounds, ”MEMORY” ”FULL” appears in the display,
and the radio returns to the previous condition.
• MY-Memory tuning is not affected by the time zone setting.