Filter
Top Products
11
GB
Preparation
Preparation
Operating on house current
To operate the unit on house current, connect the supplied AC power
adaptor* to the DC IN 3V jack of the unit.
Before connecting the AC power adaptor, be sure to set the voltage of the
adaptor to your local power line voltage with a screwdriver as illustrated.
The AC power adaptor does not operate when set to OFF.
Do not set the voltage while connected to the outlet, since this may cause
malfunction.
Notes on the AC power adaptor
• Do not bend or twist the power cord forcibly. Do not place heavy
objects on the power cord.
• When disconnecting the AC power adaptor from the wall outlet, pull
out by the plug. Do not pull the cord itself.
• Disconnect the AC power adaptor from the wall outlet and the radio
when the unit is not to be used for a long period of time.
Tip
When the AC power adaptor is plugged into the DC IN 3V jack, the
batteries are disconnected, and the unit automatically switches to
external power source.
Notes on external power sources
• Keep the batteries installed even when operating on external power, as
they supply power for the unit’s memory backup. Replace the batteries
once a year.
• Turn off the unit when connecting or disconnecting external power
sources. Otherwise, the power may go off and “i” may appear. In
this case, turn on the power again to clear the “i” indication.
• When operating the unit on batteries, first disconnect the AC power
adaptor from the wall outlet, then disconnect the AC power adaptor
from the DC IN 3V jack of the unit. The unit will not run on batteries as
long as the DC IN 3V jack is plugged in.
• Use only the recommended AC power adaptor
manufactured by Sony. Using AC power adaptors
with different specifications (polarity of the plug,
etc.) will result in malfunction and damage to the
unit.
• Use the supplied AC plug adaptor* if the AC power adaptor plug does
not match your wall outlet.
* Not supplied for models for certain countries. See “Specifications”.
2
to the DC IN
3V jack
3 to a wall outlet
Polarity of the plug
Screwdriver
1