Filter
Top Products
Additional information
65
EN
Additional information
Cause/Solution
The volume of the rear speakers may have been
automatically lowered in order to maximize the effect of the
listening position adjustment.
n Adjust the balance.
The speaker balance can be set separately for the DSP
Sound Tuning mode (see page 53).
Problem
No sound, or sound is too low.
DSP functions
Radio reception
Problem
Preset tuning is not possible.
Automatic tuning is not
possible.
The “ST” indication flashes.
Interference occurs during FM
reception.
Cause/Solution
•Memorize the correct frequency.
•The broadcast signal is too weak.
The broadcast signal is too weak.
n Use manual tuning.
•Tune in the frequency accurately.
•The broadcast signal is too weak.
n Set to the monaural mode (see page 37).
The Wide mode is selected.
n Set to Narrow or Auto mode (see page 39).