Filter
Top Products
36 Radio
EN
Note
If the radio can only
tune in a few stations or
receives only weak
frequencies, the BTM
function may not assign
frequencies to all the
preset station numbers.
Selecting stations with the strongest
signals (BTM)
1 While listening to an FM or AM broadcast,
press and hold DSPL for two seconds.
2 Press BTM.
The unit selects the station with the strongest signals
and memorizes them in the order of their frequencies.
A beep sounds after storing the stations and the unit
returns to the normal display.
Selecting the mode with the wireless remote
While listening to an FM or AM, press MENU and set the
Preset mode to “BTM.”
What is the BTM (Best Tuning Memory) function?
BTM is a function that selects the radio stations with the
strongest signals and automatically sets them to preset
station numbers. The BTM function starts tuning in
stations from the lowest frequency on the band (FM or
AM). When a station is found, the unit assigns the
frequency to the currently selected preset station number.
When preset numbers are not displayed, the unit assigns
frequencies starting with preset station 1.
Even after the unit has assigned frequencies to all the
preset station numbers, the unit continues tuning. If
stronger signals are found, the unit replaces the current
preset stations with the stronger frequencies. Finally, the
unit sorts the stations in ascending order by frequency.
OPENDSPL
891076
5
DSPL
BTM
MONO
LCL
BTM
Tip
If the Select mode the in
Func. menu is set to
“Source,” the function
menu is automatically
appears on the right
side of the display,
depending on the
source you select. (see
page 48)