Filter
Top Products
Other functions
45
EN
Other functions
Sub Menu
Clock
Beep
Rotary remote
SEEK/AMS
Digital out
VC filter
Direct Volume
Explanation and settings
Select “on” to display the current time in
the upper-left corner of the display at all
times. If you select “off,” the time is
displayed only when the system is turned
off. Select “Time Set” to set the clock (see
page 6).
Specifies whether a beep sounds when an
operation button is pressed.
Reverses the rotational direction of the
rotary remote for controlling operations.
Select “normal” for increasing volume,
frequency, track numbers, etc. by rotating
the remote clockwise. Select “reverse” for
increasing the same parameters by rotating
the remote counterclockwise.
The SEEK/AMS function has two modes:
Normal mode — Select “SEEK/AMS” to
quickly locate tracks or stations.
Item select mode — When the name list is
displayed, select “Item sel” to locate discs
or stations using the rotary remote or the
front panel control.
Select “ON” to output the digital signals
through DIGITAL OUT if optional
equipment with digital input is connected.
Select “OFF” to cancel the output of digital
signals.
Select one of four filter types for adjusting
the sound to match your desired sound
image, the music source, etc.
Select “on” to output the signal without
processing through the volume control
circuit for pure high quality sound. In this
case, the bass and treble adjustment do not
work.
Select “off” to output the signal through the
tone control circuit. You can control the
bass and treble levels, but the pureness of
the original sound will be degraded.