Filter
Top Products
To return to normal play mode
PressPGMagain.
1 Press PGM.
2 Press the DISC SELECT button which
corresponds to the disc you want.
corresponds to the selection you want,
® _34s
:, 'r,,i,,dTo program additional selections on a same
disc, repeat step 3.
To program additional selections on another
disc, repeat steps 2 and 3.
To play the programmed selections
Press • (or • II on the main unit).
To insert a pause into your program
(possible only with the CDP.C50)
While programming, press II at a point between two
selections• When the program is played and reaches this
point, the disc will stop and stand by until you press II
again.
This function allows you to change the tape when making a
recording.A pause cannot be programmed first in the
program line up.
I
P 3
@®34s
-- I 2 3 4 5 6 7 _1 9 _ _12 13 14 Is 15
P (pause) has been programmed, It is 3rd in the program line
up.
The maximum selection number which can be programmed
On the disc in the DISC 1 tray; up to the 99th selection
On the disc in the other trays; up to the 30th selection
To display the total playing time of the program
Press TIME before starting play•
"" ,'a 36.2S_
0303 3 ", s ......
To display the time remaining in a selection
Press TIME once while the unit is in the play or pause mode.
To return to normal display, press TIME once more.
To program while observing the disc labels
You can program the selections with tr_edisc compartment opera.
When s program is full
_J _r __appears and no more selections can be added.
L) I
Space between selections
There is a 3 second blank between each programmed selection.
However, when consecutive selections (e.g. 4th - 5th) from one
disc are added to a program, the original amount of time between
the selections is retained.