Sony CD-PC50 Speaker User Manual


 
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution. Do not use any type
of abrasive pad, scouring powder or solvent such as alcohol
or benzine.
Cleaning discs
Before playing, clean the disc with the cleaning cloth. Wipe
the disc from the center out.
Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for analog
discs.
After playing, store the disc in its case.
COMPACT DISC PLAYER
System Compact disc digital audio system
Laser Semiconductor laser (X = 780 nm)
Emission duration: continuous
Laser output Max. 44.6 _W*
* This outputisthevaluemeasuredatadistance of
about200mm from theobjectirelenssurfaceonthe
OpticalPick-upBlock.
Frequency response
2 Hz - 20 kHz (-+0.5 dB)
Signal to noise ratio
More than 100 dB
Dynamic range More than 88 dB
Harmonic distortion
Less than 0.C5% (1 kHz)
Channel separation
More than 95 dB (1 kHz)
Wow and flutter Below measurable limit
Outputs LINE OUT (phono jacks)
Output level 2 V (at 50 kilohms)
Load impedance over 10 kilohms
HEADPHONES (stereo phone jack)
(CDP-CS0 only)
Output level 0 - 2.4 mW (variable)
(at 32 ohms)
General
Power requirements
120 V AC,60 Hz
Power consumption
12W
Dimensions Approx. 430 x 110 x 385 mm (w/hid)
(17 x 431=x 15% inches)
not including projeoting parts and controls
Weight Approx. 5.7 kg (12 Ibs !0 oz), net
REMOTE COMMANDER (supplied only for the CDP-CS0)
Remote control system
Infrared control
Power requirements
3 V DC with two size AA (R6) batteries
Dimensions Approx. 61 x20 x 150 mm (wlhld)
(2Zl=x =Zl=lx 6 Inches)
Weight Approx. 110 g (4 oz)
Including batteries
SUPPLIED ACCESSORIES
Audio signal connecting cord
(phono plug x 2.,--phone plug x 2) (t)
CDP-CS0 on(y:
Sony SUM-3 (NS) batteries (2)
Design and specifications subject to change without notice.