Filter
Top Products
61
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\090SET.fm
masterpage:
Right
Settings and Adjustments
You can enjoy high quality sound if the AAC
is enabled. In case you cannot listen to AAC
sound from your device, select [Off].
x [Bluetooth Power Setting]
[On]
: The BLUETOOTH power is turned
on. A paired BLUETOOTH device can
always connect to the main unit.
[Off]: The BLUETOOTH power is only
turned on when “BT” function is
selected.
In some applications, you may not be able
to make the connection directly from the
BLUETOOTH device even though you have
set [Bluetooth Power Setting] to [On]. In
this case, press BLUETOOTH.
[Network Settings]
x [Internet Settings]
Connect the system to the network
beforehand. For details, see “Step 3:
Preparing for Network Connection”
(page 25).
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable. When you select this setting,
the built-in wireless LAN is disabled
automatically.
[Wireless Setup(built-in)]: Select this
when you use the built-in wireless LAN
of the system for wireless network
connection.
For further details, visit the following
website and check the FAQ:
http://www.sony.com/blurayhtsupport/
x [Network Connection Status]
Displays the current network
connection status.
x [Network Connection Diagnostics]
You can run the network diagnostic to
check if the network connection has
been made properly.
x [Connection Server Settings]
Sets whether or not to display the
connected DLNA server.
x [Auto Renderer Access Permission]
[On]: Allows automatic access from a
newly detected DLNA controller.
[Off]: Off.
x [Renderer Access Control]
Sets whether or not to accept
commands from DLNA controllers.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows turn on the system by a
device linked via network when the
system is in standby mode.
[Off]
: The system cannot be turned on
by a device linked via network.
[Easy Network
Settings]
Runs [Easy Network Settings] to make
the basic network settings. Follow the
on-screen instructions.
Note
Note
Tip