Sony BDV-N9200W Home Theater System User Manual


 
45
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\080OTH.fm
masterpage:
Right
Tuner/Other Operations
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony equipment that is
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified.
To use the “BRAVIA” Sync function, be sure
to turn on the system and all connected
equipment after completed the HDMI
connection.
Control for HDMI - Easy Setting
You can set the system’s [Control for
HDMI] function automatically by
enabling the corresponding setting on
the TV.
For details about the Control for HDMI
function, see “[HDMI Settings]”
(page 59).
System Power Off
You can turn the system off in sync with
the TV.
The system does not turn off automatically
while playing music or when “FM” function
is selected.
One-Touch Play
When you press N on the remote
control, the system and TV turn on, and
the TV’s input is switched to the HDMI
input which the system is connected.
System Audio Control
You can enjoy the sound from TV or
other equipment by a simple operation.
You can use the System Audio Control
function as follows:
• When the system is turned on, the
sound of the TV or other equipment
can be output from the speakers of the
system.
• When sound from the TV or other
equipment is output via the speakers
of the system, you can switch the
sound to output from the TV speakers
by pressing SPEAKERS TVyAUDIO.
• When sound from the TV or other
equipment is output via the speakers
of the system, you can adjust the
volume and turn off the sound of the
system by operating the TV.
Audio Return Channel
You can enjoy TV sound via the system
by using just one HDMI cable. For details
of the setting, see “[Audio Return
Channel]” (page 59).
Language Follow
When you change the language for the
on-screen display of the TV, the
system’s on-screen display language is
also changed after turning off and on
the system.
Routing Control
When you perform One-Touch Play on
the connected equipment, the system
turns on and sets the system’s function
to “HDMI1” or “HDMI2” (depending on
the HDMI input jack in use), and your
TV’s input is automatically set to the
HDMI input to which the system is
connected.
Other Operations
Note
Note