Filter
Top Products
40
GB
Basic Operations
To save the power in standby mode
Press "/1 while the system turns on, then the system enters standby mode. To cancel standby mode,
press "/1 once.
To enter power standby mode, make sure that the system is in the following status.
– [CONTROL FOR HDMI] is set to [OFF] (page 71).
– “S-AIR STBY” is set to “OFF” (page 76).
Note
• When the system is turned off, do not push a disc into the control unit.
Additional operations
1)
Except for JPEG image files.
2)
Scan speeds may differ with some discs.
3)
DVD VIDEO, DVD-R, DVD-RW, VIDEO CD only.
4)
Except for VIDEO CDs.
5)
For a DATA CD/DATA DVD, this function works only for DivX video files.
6)
DVD VIDEO/DVD-RW/DVD-R only. The button can be used except for DivX video files.
7)
DVD VIDEO/DVD-RW/DVD-R/DVD+RW/DVD+R only. The button can be used except for DivX video files.
Note
• You may not be able to use the instant replay or instant advance function with some scenes.
To Press
Stop x
Pause X
Resume play after pause X / H on the remote or N (soft-touch button) on the control unit.
Go to the next chapter, track, or scene
1)
>
Go back to the preceding chapter, track,
or scene
1)
. twice in a second. When you press . once, you can go to the
beginning of the current chapter, track or scene.
Turn off the sound temporarily MUTING. To cancel muting, press it again or VOLUME + to adjust the
sound volume.
Stop play and remove the desired disc Z
Locate a point quickly by playing a
disc in fast forward or fast reverse
(Scan)
1)2)
M/ or /m while playing a disc. Each time you press M/
or /m during scanning, the playback speed changes. To return to
normal speed, press H. Actual speeds may differ with some discs.
Watch frame by frame (Slow-motion
Play)
3)
M/ or /m
4)
while the system is in pause mode. Each time you
press M/ or /m
4)
during Slow-motion Play, the playback
speed changes. Two speeds are available. To return to normal playback
speed, press H.
Play one frame at a time (Freeze
Frame)
3)5)
to go to the next frame while the system is in pause mode. Press
to go to the preceding frame while the system is in pause mode (DVD
VIDEO/DVD-VR/DVD-R/DVD-RW/DVD+R/DVD+RW only).
To return to normal playback, press H.
Replay the previous scene
(10 seconds before)
6)
(instant replay) during playback.
Briefly fast forward the current scene
(30 seconds after)
7)
(instant advance) during playback.