Sony 3-289-450-44(1) Stereo Receiver User Manual


 
8
GB
About the indicators on the display
12
3
4 5 6
7
8
9 0
qa
qj
qd
ws
w
a
w;
ql
qk
qh
qf
qg
qs
Name Function
ASW Lights up when the audio signal
is output from the
SUBWOOFER jacks.
BLFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
CCOAX Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack (page 75).
DOPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack (page 75).
E
;
D/
;
D EX/
;
D+/
;
TrueHD
; D” lights up when the
receiver is decoding Dolby
Digital signals.
; D EX” lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
; D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
; TrueHD” lights up when
the receiver is decoding Dolby
TrueHD signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO” (page 75).
Name Function
F Neural - THX Lights up when the receiver
applies Neural - THX
processing to input signals.
G DTS/
DTS-ES/
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS
96 kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO” (page 75).
H D.RANGE Lights up when dynamic range
compression is activated (page
48).
I SP A/SP B/
SP A+B
Lights up according to the
speaker system used (page 30).
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
J SLEEP Lights up when the sleep timer
is activated (page 81).
K Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 63), etc.
Note
“RDS” appears for models of
area code CEL, CEK, ECE
only.