Sony 3-289-204-12(1) Stereo Receiver User Manual


 
109
US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\090OTH.fm masterpage: Right
STR-DA2400ES
3-289-204-12(1)
Other Operations
Speaker settings
[<SPEAKER>]
Speaker pattern
[SP PATTERN]
3/4.1, 3/4, 3/3.1, 3/3, 2/4.1,
2/4, 3/2.1, 3/2, 2/3.1, 2/3,
2/2.1, 2/2, 3/0.1, 3/0, 2/0.1, 2/0
3/4.1
Front speakers
[FRT SP]
LARGE, SMALL LARGE
Center speaker
[CNT SP]
LARGE, SMALL LARGE
Surround speakers
[SUR SP]
LARGE, SMALL LARGE
Bi-amplifier
[BI-AMP SP]
OFF, ON OFF
Front left speaker distance
[FL DIST.]
FL 3’3” to FL 32’9” (FL 1.0 m to
FL 10.0 m) (1 inch (0.01 m) step)
FL 9’10”
(3 m)
Front right speaker distance
[FR DIST.]
FR 3’3” to FR 32’9” (FR 1.0 m to
FR 10.0 m) (1 inch (0.01 m) step)
FR 9’10”
(3 m)
Center speaker distance
[CNT DIST.]
CNT 3’3” to CNT 32’9” (CNT 1.0 m
to CNT 10.0 m) (1 inch (0.01 m) step)
CNT 9’10”
(3 m)
Surround left speaker distance
[SL DIST.]
SL 3’3” to SL 32’9” (SL 1.0 m to
SL 10.0 m) (1 inch (0.01 m) step)
SL 9’10”
(3 m)
Surround right speaker distance
[SR DIST.]
SR 3’3” to SR 32’9” (SR 1.0 m to SR
10.0 m) (1 inch (0.01 m) step)
SR 9’10”
(3 m)
Surround back speaker distance
[SB DIST.]
SB 3’3” to SB 32’9” (SB 1.0 m to
SB 10.0 m) (1 inch (0.01 m) step)
SB 9’10”
(3 m)
Surround back left speaker distance
[SBL DIST.]
SBL 3’3” to SBL 32’9” (SBL 1.0 m to
SBL 10.0 m) (1 inch (0.01 m) step)
SBL 9’10”
(3 m)
Surround back right speaker
distance [SBR DIST.]
SBR 3’3” to SBR 32’9” (SBR 1.0 m
to SBR 10.0 m) (1 inch (0.01 m) step)
SBR 9’10”
(3 m)
Subwoofer distance
[SW DIST.]
SW 3’3” to SW 32’9” (SW 1.0 m to
SW 10.0 m) (1 inch (0.01 m) step)
SW 9’10”
(3 m)
Distance unit
b)
[DIST. UNIT]
METER, FEET FEET
Front speakers crossover
frequency
b)
[FRT CROSS]
CROSS 40 Hz to CROSS 200 Hz
(10 Hz step)
CROSS
120 Hz
Center speaker crossover
frequency
b)
[CTR CROSS]
CROSS 40 Hz to CROSS 200 Hz
(10 Hz step)
CROSS
120 Hz
Surround speakers crossover
frequency
b)
[SUR CROSS]
CROSS 40 Hz to CROSS 200 Hz
(10 Hz step)
CROSS
120 Hz
Speaker Impedance
[SP IMP.]
8 ohms, 4 ohms 8 ohms
Menu
[Display
window]
Parameters
[Display window]
Settings Initial
setting
continued