Filter
Top Products
SONOS PLAYBAR
13
Using the Sonos Controller for Mac or PC
1.
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2.
Select Room Settings if it is not already highlighted on the left.
3.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down.
4.
Select the TV Dialog tab.
5.
Click and drag the Audio Delay (Lip Sync) slider to increase or decrease the sound delay if the image and the audio are
not in sync.
6.
Close the Settings window when changes are complete.
Additional TV sound options
Speech Enhancement
The Speech Enhancement setting makes the TV dialog easier to hear. Touch the icon on your Sonos controller’s Now
Playing screen to turn this setting on or off. (If the setting isn’t visible, make sure the room with the PLAYBAR is selected.)
Night Sound
The Night Sound setting adjusts the audio for night time viewing so you can reduce the volume and still experience proper
balance and range. At lower volumes, quiet sounds are enhanced and the intensity of loud sounds is reduced. Touch the icon
on your Sonos controller’s Now Playing screen to turn this setting on or off. (If the setting isn’t visible, make sure the room
with the PLAYBAR is selected.)
TV autoplay
When TV Autoplay is set to On, TV audio automatically plays through the PLAYBAR when you turn on your television—if music
is playing when the TV is turned on, the music immediately stops and the PLAYBAR switches to TV audio. Additionally, if the
PLAYBAR is in a room group when the TV is turned on, it automatically drops from the group. This setting is On by default.
Using a handheld Sonos controller
1.
From the Settings menu, select Room Settings.
2.
Select the room the PLAYBAR is located in.
3.
Select TV Setup and Control -> TV Autoplay.
4.
Select On or Off.
Using the Sonos Controller for Mac or PC
1.
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2.
Select Room Settings if it is not already highlighted on the left.
3.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down.
4.
Select the TV Setup tab.
5.
Check the TV Autoplay checkbox to turn this setting on, uncheck to turn it off.
6.
Close the Settings window when changes are complete.