Filter
Top Products
40
good, press and hold menu to return to
the main display screen.
7 Ensure Edge is tuned to channel 1,
the XM Preview channel. Upon power
up, Edge should tune to channel 1 by
default, when it’s not yet activated. If
it’s not on channel 1, refer to “Listening
to Satellite Radio” on page 55 to
learn about how to tune a channel.
8 Turn on your vehicle’s stereo system.
Set it to play from the auxiliary input
source. You should hear channel 1, the
XM Preview channel, through your
vehicle’s stereo system. You are now
ready to activate your Edge.
9 The audio level output of Edge
can be
increased or decreased as necessary to
match the audio levels of other sources
in your vehicle. Refer to “Set Audio
Level” on page 81.
If the signal reception is good, showing at least one bar in the upper left corner
of the display, but there is no XM audio, be sure the vehicle’s stereo system is
set to the auxiliary input source (step 4). Also be sure that the audio level is set
high enough to be heard (step 5). Refer to “Troubleshooting” on page 92 for
additional help.
Vehicle Installation