Filter
Top Products
SV1 Receiver User and Installation Guide
7
Installation
Installation of your SV1 SIRIUS One is easy:
1. Choose a location in your vehicle where you will
mount the Receiver, either on the visor, the
dash, or the windshield.
2. Mount the Receiver on the visor using the visor/
dash mount, or on the dash using the visor/dash
mount and the velcro strips, or on the
windshield using the suction cup mount.
4. Install the magnetic antenna on the roof of the
vehicle, and route the antenna cable to the
Receiver.
4. Connect the power cord for the Receiver to your
vehicle’s cigarette lighter.
5. Subscribe to the SIRIUS service and begin
enjoying the SIRIUS entertainment!
Location
Choose a location in your vehicle where the
Receiver will not block your vision, interfere with the
vehicle controls, or obstruct the air bag. If you are
using the suction cup mount, the location should be
suitable for using the suction cup mount, such as
the windshield or other flat, smooth surface.
The location should be easily reachable and provide
good visibility of the Receiver.
Mounting the Receiver
Attach the desired mounting device, suction cup
mount or visor/dash mount, to the to the Receiver by
sliding the flat portion of the mount into slot on the
top edge of the Receiver. Gently slide the mounting
device in until it snaps into place.
S
N
A
P
S
N
A
P