Filter
Top Products
SV1 Receiver User and Installation Guide
19
If no FM frequencies have been preset when the FM
Preset button is pressed, the Receiver will default to
a frequency of 88.1 MHz.
Pressing and holding the FM Preset button will
display the list of FM presets. Use the channel up
and down buttons to browse through the list.
- M 8 1F 8 .1
- M 9 5F 1 .2
- 1M 0 9F 3 .5
If you want to change the FM frequency of a preset,
press the select button to choose the preset when it
is displayed. Use the channel up and down buttons
to select an FM frequency and press the select
button. The preset will now display the new FM
frequency. To select the preset, press the MENU
button.
You may also change the FM presets by using the
FM Presets menu option of the Receiver. (Refer to
the
FM Transmitter
section in the
Menu Options
section of this manual for instructions on
programming the FM presets list.)
Menu Options
To enter the Menu Options page of the Receiver,
press and hold the select button, or press the
MENU button on the remote control. The menu
options will be then displayed.
AR SM M TF I TTN
To select a menu option, use the channel up and
down buttons to display the option you wish to
adjust, and press the select button. If a selection is
not made within 10 seconds, the Receiver will exit
the menu options mode, and revert to the last active
display mode.