Sirius Satellite Radio SDSV6V1 Satellite Radio User Manual


 
47
Option 3: PowerConnect Installation Instructions
1 Insert your Stratus 6 into the
dock, aligning the radio against
the rear of the dock so that the
rails on the dock fit into the
mounting slots in the back of
the radio.
2 Power on Stratus 6 radio by
pressing the Power button.
3 Be sure the vehicle is outside
and the antenna has a clear
view of the sky. Verify that you
are receiving the SIRIUS signal. There should at
least be one bar on the upper right corner of the
main display screen that denotes antenna signal
strength. You can also press and hold menu and
then press
to scroll to and highlight Signal.
Press the Select button. The Satellite and
Terrestrial bars show the strength of the signal
being received. If the signal
reception is good, press and
hold menu to return to the main
display screen. You are ready to
make the audio connection.
jump
sel
Signal
SAT - +
TER - +
jump
menu
sel