Filter
Top Products
42
4 Power on your Stratus 6 by pressing the Power
button.
5 Be sure the vehicle is outside and the antenna has a
clear view of the sky. Verify that you are receiving
the SIRIUS signal. There should at least be one bar
on the upper right corner of the main display screen
that denotes antenna signal strength. You can also
press and hold menu and then press
to scroll to and highlight Signal.
Press the Select button. The
Satellite and Terrestrial bars show
the strength of the signal being
received. If the signal reception is
good, press and hold menu to return
to the main display screen.
6 Ensure that the Stratus 6 is tuned to channel 184. Upon power up,
the Stratus 6 should tune to channel 184 by default, when it’s not yet
activated. If it’s not on channel 184, refer to “Listening to Satellite
Radio” on page 62 to learn about how to tune a channel.
7 Turn on your vehicle’s stereo system. Set it to play input from the
auxiliary input source.
8 You should hear SIRIUS channel 184 through your vehicle’s stereo
system. You are now ready to activate your Stratus 6.
9 The audio level output of the Stratus 6 can be increased or decreased
as necessary to match the audio levels of other sources in your vehicle.
Refer to “Audio Level” on page 84.
jump
sel
Signal
SAT - +
TER - +
Vehicle Installation