Filter
Top Products
Storing Song Titles
1. While the Receiver is in the Default display mode, momentarily pressing and releasing the MEMO button stores the current program data
information within the Receiver’s memory. A memory “Stored” pop-up screen, followed by “X Used/Y Empty” will each appear for 1 second
(below).
2. If the MEMO button is pressed and all of the memory spaces are full, S-Seek Full will flash on the display for 1 second, followed by a pop-
up screen presenting the Replace-Cancel options. This prompt allows you to make the following Replace/Cancel choices:
• By selecting Replace, the memory list will appear, and you can use the Channel Switch to select the data that you would like to overwrite
with the new Artist/Song Title. After highlighting the selected title in the list, press SELECT to delete the stored Artist/Song Title and
replace it with the updated information. The display will show the “Stored” screen.
• By selecting Cancel, the prompt screen will disappear and revert to the original screen. Nothing will be stored.
Viewing Program Information stored in Memory
1. Press and hold the MEMO button for 3 seconds to enter S-Seek Mode. The program information stored in memory will be displayed one-
at-a-time in page format.
2. Use the Channel Switch to scroll through the listings. This function allows you to review previously stored program information.
Deleting a Song Title Stored into Memory
1. Press SELECT while in S-Seek Mode. A pop-up screen displaying two selectable options - “Delete” and “S-Seek” - is displayed.
2. Use the Channel Switch to highlight the “Delete” option.
3. Press SELECT and a Delete confirmation screen will appear.
4. To permanently delete the program from your list, select “Yes” using the Channel Switch and press SELECT to confirm.
9