Filter
Top Products
Channel Block
The receiver has the ability to lockout the use of any channels you do not want others to access without your permission. Like the Skip
feature, the locked channel will not appear when the user changes channels with the Channel Switch. When the user tries to access a
locked channel using the Direct Tuning function, the “Enter Code” screen will be displayed and the channel will not be accessed until the
proper code is entered.
While in the “Menu Options” List mode, follow the steps below to Lock a channel:
1. Use the Channel Switch to highlight the “Channel Block”. Press SELECT.
2. Select “Lock/Unlock” from the Lock Options Menu (below left) and press SELECT.
3. Use the Channel Switch to select the channel you want to lock. Press SELECT (below right).
Changing the Lock/Unlock Code
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “1111”. This code
can be maintained or changed. To change the lock code, perform the following procedure while in the “Menu Options” List mode:
1. Use the Channel Switch to highlight “Lock Options”. Press SELECT.
2. Select “Edit Code” from the Lock Options Menu and press SELECT.
3. Enter your current code or the default code “1111”.
4. The “New Code” prompt will appear. Enter your new four digit code using the 1-6 number buttons. You will then be prompted to confirm
the new code by entering it again.
5. The lock code is now changed.
Note: You can use this same method to edit the code after it has changed from the default.
Time Based Features
This Menu Option allows for adjustment of the following items:
Clock
Auto Shutdown
Sleep Mode
To change the Time-Based Features, use the following procedure while in the “Menu Options” List mode:
1. Use the Channel Switch to highlight the “Time Based Features”. Press SELECT.
2. Use the Channel Switch to select one of the following Time-Based Features to adjust:
a. Clock: When entering this menu option, you can configure format of the clock shown on the default display and the time zone
in which you reside. The clock data is provided via the SIRIUS Satellite data stream, and will update based on the received signal.
• Format: The Clock Format option allows for either 12 Hour (Default) or 24 Hour display.
• Time Zone: Since the clock adjusts automatically, it is important to specify your proper time zone. Use the Channel
Switch to select the proper time zone. The following is a list of time zones available:
(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic
(GMT-3:30) Newfoundland (Abbreviated as Newfndlnd)
• Daylight Savings Time: Activate this function if your area is subject to DST; use the Channel Switch to toggle
between DST Observed (default) or DST Not Observed.