Sirius Satellite Radio EQ-SIRRCV Satellite Radio User Manual


 
7
Search Modes (Category, Channel, Artist, Song Title)
The receiver has several ways to search for and select music: by channel, by category, by artist and by song title.
Searching Channels
If you want to find a different channel to listen to, press and hold the DISPLAY button to enter Channel List mode:
1. Use the CATEGORY buttons to scroll through music and entertainment categories.
2. Use the Channel Switch to scroll through the available channels in each category.
3. When the channel you want is highlighted, press SELECT to tune to it. The channel will change and the display will revert to the Default
screen for the new channel.
• Pressing the DISPLAY button while in the Channel List Mode will change between Channel Name, Artist Name and Song Title to preview
what is playing on other channels before selecting.
To exit this mode without changing to a new channel, press and hold the DISPLAY button for 1 second.
Setting Channel Presets
You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 5 banks, each containing 6 channel
presets.
1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the Default screen.
2. Select the channel you want to preset (see the Basic Operation and Changing Channels section).
3. Hold the numbered preset button you want to store the channel in for at least 2 seconds.
• You will hear a beep and “Preset Stored” will flash to indicate that the channel has been memorized.
• If the preset button already has a channel stored in it, it will be replaced by the new channel.
Recalling Channel Presets
The 6 presets in the active bank (A - E) can be selected by pressing the “0” – “6” buttons.
1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the top right corner of the Default screen.
2. Press the desired preset button to recall the preset. The channel will change and the display will revert to the Default screen for the new
channel.