Filter
Top Products
- 13 -
Selecting a saved station
• In order to select a saved station directly, first
use the frequency selection switch to select the
frequency range where the station is saved.
• Press the
PAGE button and then use the UP or
DOWN buttons to select a memory page (from
00–39).
• Within 10 seconds press the
M.0/5–M.4/9
buttons to select a memory space to store
the station.
The station is played immediately after entering
the memory space.
Carry out automatic station search
Your world receiver can search the frequencies with-
in a range and store the stations it finds. Do the fol-
lowing to activate the automatic search (automatic
memory scan/AMS):
• Press the
MEM button once.
The MEM message flashes.
• Hold down the
MEMORY SCAN button
for about 1 second.
The world receiver now searches all frequencies in
the currently selected frequency range and saves
the stations it finds from the currently set memory
page and memory space.
Displaying memory spaces
• Press the MEMORY SCAN button to call up the
content of all station memories for the selected
band.
All stored stations will be played in succession
for about five seconds.
• Press any button to stop playing the memory
spaces.
Cleaning
Risk of injury from electric shock!
• Never immerse the device’s parts into water
or other liquids!
• Do not allow liquid to penetrate the housing.
Cleaning the housing
Clean the housing surface with a slightly damp
cloth. Never use petrol, solvent or detergents that
could attack the plastic!
Disposal
Do not dispose of the appliance in
your normal domestic waste. This
product is subject to the European
guideline 2002/96/EC.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Battery disposal
Batteries may not be disposed of with normal
domestic waste. All consumers are statutorily
obliged to dispose of batteries at the collection po-
int in their community/district or with the
original supplier.
The purpose of this obligation is to ensure that
batteries can be disposed of in an environmentally
friendly manner. Only dispose of batteries when
they are fully discharged.
Disposal of packaging
Dispose of all packaging materials
in an environmentally friendly manner.
IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 13