Filter
Top Products
- 8 -
Summer time offset
• While the time zone indication is still flashing,
press the
SNOOZE button. The screen shows the
SUN OFF message when summer time has
been deactivated.
• Press the
SNOOZE button again. The screen now
shows SUN ON. Summer time offset is now
activated and the clock moves one hour
ahead.
Show world time
• Press MODE again or four times to show the
world time. The city abbreviation appears with
the corresponding time.
• Press the
UP or DOWN button to move the time
zone forward or backward.
Special date alarm
• Press the MODE button a fifth time to set the spe-
cial date alarm. The screen flashes SDA1 and
the date in succession.
• Press the
PAGE button to select one of the ten
settable date alarms (SDA1–SDA10).
• Press the
UP or DOWN button to set the date on
which the alarm should sound.
• Press the
SNOOZE button to ignore the year num-
ber setting so that the alarm sounds every year.
• If the current date is the same as the SDA date,
an alarm sounds every hour from 8 o’clock on
this day. In addition, the SDA message will
flash on the screen.
• Turn off the alarm by pressing any button.
Note:
In order to completely deactivate the date
alarm set a date that is in the past!
Setting 12/24 hour mode
• Press MODE eight times. The screen shows
the 24 HR message for 24 hour mode.
• Press the
UP button to set the 24 hour mode.
• Press the
DOWN button to set the 12 hour mode.
12 HR is displayed on the screen. In the afternoon
in addition PM is shown on the screen.
Automatic update (RDS)
The RDS signal transfers additional information such
as the station name, time or song title to the radio.
The time is updated automatically when the RDS
signal is received.
• Press
MODE nine times. The screen displays
UPDA ON if the update function is activated.
• Press the
UP button to activate the automatic
update.
If the radio is switched on, a clock symbol now
flashes to the top left of the screen. The time is
now updated automatically if a station with an
RDS signal is received. The update is complete
when the clock symbol stops flashing and is
displayed permanently.
• Press the
DOWN button to deactivate the auto-
matic update. The screen displays UPDA OFF.
When the radio is switched on, no clock sym-
bol is displayed.
Select display mode
You can select which information is shown on the
screen when the radio is switched off.
The selected mode is indicated by a corresponding
symbol on the screen.
IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 8