- 10 -
Interrupting the alarm
• Press the SNOOZE button to interrupt the alarm
for10 minutes.
Set snooze time
• Press the MODE button seven times; the screen
displays the snooze time set
(default is SNO10).
• Use the
UP and DOWN buttons to set the snooze
time to a time between 1 and 59 minutes.
Turning off the alarm function
• Press the VOL.+/AL–1 or VOL.–/AL–2 button until
the relevant alarm symbols disappear from
the screen.
Stop watch function
The stop watch function is only available when the
radio is switched off.
• Press and hold down the PAGE button for around
2 seconds, the screen shows 00.00.0 U.
• Press
SNOOZE to start the stop watch. The maxi-
mum time for the stop watch is 99 minutes and
59 seconds. If the stop watch exceeds the maxi-
mum time, 99:59.0 is displayed and flashes.
• During time measurement, it can be stopped by
pressing
SNOOZE.
• Pressing
SNOOZE again restarts the stop watch.
• Hold down
SNOOZE to reset the stop watch.
• Leave the stop watch by pressing
PAGE.
Countdown function
The countdown function is only available when
the radio is switched off.
Set and save countdown
• Press and hold down the MEMORY SCAN button
for around 2 seconds, the screen shows
D 00.00.
• Press the
UP or DOWN button to set the
desired time.
5 countdown times are preset on the memory
buttons and you can open these directly using
the corresponding memory button:
Button
M.0/5 10:00
Button
M.1/6 30:00
Button
M.2/7 45:00
Button
M.3/8 60:00
Button
M.4/9 90:00
• Press the
MEM button to save the set time, the
memory space indicator
MEM flashes on the
screen. Now use the
M.0/5–M.4/9 buttons to
select a memory space; when you press the
relevant memory key the time is saved in this
memory space and the time previously stored
there overwritten.
• When the
MEMORY SCAN button is pressed again
you leave the countdown mode.
Call up and activate the countdown function
• Press and hold down the MEMORY SCAN button
for around 2 seconds, the screen shows
D 00.00.
• Select the desired, saved countdown time with
the aid of the
M.0/5–M.4/9 memory buttons.
• Press
SNOOZE to start the countdown. Pressing
the
SNOOZE button again pauses the countdown.
IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 10