Filter
Top Products
ENGLISH
16
Operate the selected component for
playback.
5
Notes:
Extreme settings at high volume may damage
your speakers.
In the DTS or Dolby Digital (AC-3) mode, the
tone cannot be adjusted and the tone direct
function is automatically enabled.
Adjust the tone(bass and treble).
7
Select the digital or the analog input
connected as desired.
4
The TONE DIRECT indicator lights up and the
sound bypasses the tone circuitry.
To cancel the tone direct function, press this button
again.
When playing back the program sources with
surround sound, refer to “ENJOYING SURROUND
SOUND” on page 19.
Adjust the (overall) volume.
6
To listen to a program source without the
tone effect.
8
When CD, VCR2 or DVD is selected
as input source
Each time this button is pressed, the corresponding
input is selected as follows;
OPTICAL 1 OPTICAL 2
ANALOG COAXIAL 2 COAXIAL 1
To listen to Dolby Digital (AC-3) program source
in the 2-CH downmix mode, in the stereo mode,
the corresponding digital input should be selected.
(For details, refer to “Downmixing into 2 front
channels” on page 14)
Notes:
When there is no signal at the selected optical or
coaxial digital input, the selected DIGITAL
INPUT indicator will flicker meaning there is no
sound at the input. (refer to “ENJOYING
SURROUND SOUND” on page 19).
The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
MASTER VOLUME
or
DOWN
UP
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILEDISPLAY T.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
MASTER VOLUME
SYS
BASS TREBLE
DIRECT
DIGITAL
INPUTS
The 6 CH DIRECT INPUT
Use this input to listen to the audio output of an
external decoder or a DVD player with built-in 6
channel decoder.
6-DIRECT is displayed and the 6 separate analog
signals from a decoder or DVD player will be connected
to this unit. You can use the tone controls and volume
control to adjust the signal. (If the TAPE MONITOR
button is to on, it will automatically be set to off.)
To cancel the 6 CH direct function, press the 6 CH
DIRECT button again or select the desired input source.
These 6 separate analog signals can be heard, only.
They cannot be recorded.
6 CHANNEL
DIRECT
or
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILEDISPLAY T.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
6 CH DIRECT
SYS