Filter
Top Products
14
In the Dolby Digital mode, repeat the
above steps 13 and 14 to adjust the rear
delay time.
15
Adjusting delay times of the
speakers in Dolby Digital(AC-3),
Dolby Pro Logic and the DSP modes
The current delay time will be displayed for 5 seconds.
In the Dolby Digital mode, only, the center delay is
adjustable and the corresponding delay time is displayed.
When playing Dolby Digital program sources in the
Theater, Hall 1 or Hall 2 modes, the center and rear
delay is adjustable just as it is in the Dolby Digital Mode.
Each time this button is pressed,
the delay time changes in regular
steps.
If the delay time disappears, please start again from
step 12.
Your receiver allows you to optimize the arrival time of
the sound from your speakers. This can help focus the
audio image and add enjoyment to your home theater
experience.
Measure the distance from the prime listening position
to each of the speakers to the nearest foot.
In the Dolby Digital mode, the optimum performance
of your system occurs when the sound from all five
speakers arrives at your primary listening position at
the same time. If all speakers are equidistant from the
main listening position, set the following delay.
Center delay time : 0 mS, Rear delay time : 0 mS
If the center speaker is closer to your prime listening
position than the average distance to the left and right
main speakers add 1 mS of center channel delay for
each foot of difference. The maximum is 5 mS.
If the surround speakers are closer to your main
listening position than the main left and right speakers
add 5 mS of surround channel delay for each 5 feet of
difference. The maximum is 15 mS.
In Dolby Pro Logic and the three DSP modes rear
channel delay can be adjusted to add spaciousness to
the presentation and to minimize any sibilant leakage
into the surround channels.
If the surround speakers are the same distance from
your primary listening position as your main left and
right front speakers, set the Rear Delay time at 15 mS.
If the surround speakers are further from your listening
position than the main left and right front speakers, set
the rear delay at 10 mS.
If the surround speakers are closer to your main
listening position than the main left and right speakers
add 5 mS of surround channel delay for each 5 feet of
difference. The maximum is 30 mS.
Downmixing into 2 front channels
To cancel the 2-CH downmix mode, select the
desired surround mode.
When play is stopped or interrupted, etc., the 2-CH
downmix mode is not canceled even though the
“ST” and the “DTS” or “Dolby Digital” indicators
go out.
DTS and Dolby Digital multi-channel program
material will be heard automatically in the 2-CH
downmix mode if headphones are plugged in and
the SPEAKER switch is set to off. However, only
the DTS or Dolby Digital indicator will be
illuminated. Unplugging the headphones and setting
the SPEAKER switch to on will restore the previous
mode.
Allows the multi-channel DTS or Dolby Digital(AC-3)
signal to be reproduced through only two speakers or
through headphones.
While playing the DTS or Dolby Digital(AC-3) program
sources, press the STEREO button.
The “ST” and the “DTS” or “Dolby Digital” indicators
light up indicating that the program has entered the 2-CH
downmix mode and the 5 discrete channels(left front,
center, right front, left surround and right surround) are
mixed down to the 2 front channels.
Adjust the delay
time.
13
Check the current delay
time. Press the D.Time
button on the remote
control.
12
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILE DISPLAYT.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
D.TIME
SYS
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILE DISPLAYT.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
ADJUST
SYS
For center delay in the Dolby Digital
mode, only. The rear delay time is
memorized automatically without
pressing the DELAY TIME button.
Memorize the delay
time.
14
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILE DISPLAYT.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
D.TIME
SYS
STEREO
or
POWER
1 2 3 4 5
6 7 8 9 0
OSD ENTER
CD
CD
AB
TUNER
DISC
REPEAT
DECK SEL.
INTRO
SCAN
AUX
DVD/TV
VCR1
EQ
PRESET
VCR2
TAPE MON.
6CH DIRECT
STEREO
CHANNEL
SEL
T.TONE
DISPLAY
CHANNEL LEVEL
SLEEP
MUTE
P.SCAN
USER FILEDISPLAYT.MON
DECK
MASTER VOLUME
REMOTE CONTROL RM-RVD-98H
A B
ADJUST
D.TIME
DSP
MODE
STEREO
SYS
ADJUSTING DELAY TIMES
ENGLISH