Filter
Top Products
12
Each time this button is pressed, the corresponding
tone mode is selected and shown for 3 seconds as
follows:
BASS TRBL(treble)
Note: When the TONE DIRECT indicator is
lighting up, the tone mode cannot be
entered.
Enter the tone mode.
10
The TONE DIRECT indicator lights up and the
sound that bypasses the tone circuitry will be
heard.
To cancel the tone direct function, press this
button again.
To listen to a program source without the
tone effect.
12
If the tone display disappears, start from the step 10
again.
Notes:
Extreme settings at high volume may damage your
speakers.
When the digital signals from DTS or Dolby
Digital program sources are input in available
surround mode, the tone cannot be adjusted and the
tone direct function is automatically switched to
ON.
At the desired tone mode, adjust the tone
as desired.
11
Adjusting the tone(bass and treble)
TONE MODE
ADJUST
TONE
DIRECT
ENGLISH