Filter
Top Products
• This outlet is switched on (power-on mode) and off
(standby mode) according to power control as
follows (Maximum total capacity is 100 W (0.43A)).
Standby mode - Switched AC outlet off
Power-on mode - Switched AC outlet on
6
• You can connect up to four pairs of
speakers to this receiver and select the
various combinations of speakers according
to your tastes.
• The speakers C and D can be installed in
the main room as the speakers A and B can
or in the another room (ROOM2) for
ROOM2 playback. (For details, refer to
"ROOM2 PLAYBACK" on page 21.)
• Be sure to connect speakers firmly and
correctly according to the channel (left and
right) and the polarity (+ and -).
• If the connections are faulty, no sound will
be heard from the speakers, and if the
polarity of the speaker connection is
incorrect, the sound will be unnatural and
lack bass.
Notes :
• For safe amplifier operation, use the
speakers with impedance of over 8Ω when
you connect a pair terminals of SPEAKER A
and B terminals or/and a pair terminals of
SPEAKER C and D terminals and use the
speakers with impedance of over 16Ω when
you connect both SPEAKER A and B
terminals or/and both SPEAKER C and D
terminals.
• Do not let the bare speaker wires touch
each other or any metal part of this receiver.
This could damage this receiver and/or the
speakers.
4. CONNECTING SPEAKERS
• Plug the cord into an wall AC outlet.
6
. AC INPUT CORD
5
. SWITCHED AC OUTLET
RX-5502(G) 2007.8.17 4:33 PM 페이지 6