Filter
Top Products
16
• Then "PRESET" lights up.
Tuning to preset stations
1.
After selecting the tuner as an input source, select the preset mode.
2.
Select the desired preset number.
4. Repeat the above steps 1 to 3 to memorize other stations.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Preset stations,etc.
• The ROOM2 settings.
3. Press the TUNING/PRESET UP ( or DOWN () button to select the desired preset
number and press the MEMORY button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEM" turns off, start again from the above step 2.
RX-5502(G) 2007.8.17 4:33 PM 페이지 16