Filter
Top Products
ENGLISH
37
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you
want.
• Then "1" of "REF 1" indication flickers.
• Each time the CURSOR LEFT() or RIGHT() button is
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
• Then the channel levels memorized into the selected
preset memory are recalled.
Recalling the memorized channel levels
1. After performing the steps 1 ~ 3 in "Adjusting the
current channel level" procedure on page 36, press
the ENTER button.
2. Press the CURSOR LEFT()/RIGHT() buttons to
select the desired preset memory, then press the
ENTER button.
1. Press the CURSOR UP()/DOWN() buttons to
select the "MODE ~ ".
2. Press the CURSOR LEFT()/RIGHT() buttons to
select the desired one of REF 1 and REF 2.