Filter
Top Products
12
ENGLISH
When CD, VIDEO 1 is selected as an input source
• When playing back the program sources with surround
sound, refer to “ENJOYING SURROUND SOUND” on
page 15.
• Each time this button is pressed, the corresponding input
is selected as follows:
o(ptical) c(oaxial) A(nalog)
Notes :
• When TUNER, TAPE or VIDEO 2 is selected as an input
source, the digital input cannot be selected.
• When the selected digital input is not connected, the
"DIGITAL" indicator flickers and the analog input is
automatically selected.
• The selected digital or analog input is automatically
assigned to the corresponding input source on the INPUT
setup menu. (For details, refer to "SETTING THE INPUT "
on page 31.)
• The sound from the component connected to the selected
digital input can be heard regardless of the selected input
source.
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
or
DOWN
UP
3. Select the digital or the analog input connected as
desired.
6. To mute the sound.
4. Operate the selected component for playback.
5. Adjust the (overall) volume.