Filter
Top Products
13
• Each time these buttons are pressed, the tone mode is
selected as follows :
OFF : To listen to a program source without the tone effect.
("DIRECT" indicator lights up.)
ON : To adjust the tone for your taste.
("DIRECT" indicator goes off.)
• Each time these buttons are pressed, the tone is selected
as follows :
BASS TRBL (treble) TONE ON
When the TONE is set to ON to adjust the tone (bass and treble).
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps 9
and 10.
• If the tone display disappears, start from the step 7 again.
9. Press the CURSOR UP()/DOWN() buttons to
select the desired tone.
10. Press the CURSOR LEFT()/RIGHT() buttons to
adjust the selected tone as desired.
8. Press the CURSOR LEFT()/RIGHT() buttons to
select the desired tone mode.
Adjusting the tone (bass and treble)
7. Enter the tone mode.
• The tone mode is displayed for several seconds.
ENGLISH