Sherwood RD-5503 Stereo Receiver User Manual


 
1. Press CURSOR UP()/DOWN() buttons to select
the desired item.
2. Press the CURSOR LEFT()/RIGHT() buttons to
set the selected item as desired
SETTING THE SYSTEM
29
SW (SUBWOOFER) : To select the desired subwoofer mode.
TONE : To adjust the tone (bass and treble) as desired.
RETURN : To return to the previous menu.
ENGLISH
When selecting the SUBWOOFER mode
"SW " mode is effective only when "FRONT", "CENTER" or "SURR" is set to "L" and "SUB- W" is set to "Y" on the SPK
SET menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 32.)
While playing the 2 channel source in MATRIX, CHURCH, THEATER, HALL or STADIUM mode, the low frequency signals
can be reproduced from subwoofer regardless of the subwoofer mode setting.
NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the
".1" channel) and the channels set to "S".
SW : When the low frequency signals of channels set to "L" are reproduced simultaneously from those channels and the
subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and
shape of the room, interference may result in a decrease of the actual volume of the low frequency range.
󳃆