Filter
Top Products
34
ENGLISH
When selecting the desired unit
• You can select either "M (Meter)" or "FT (Feet)".
• Once a unit is selected, the distances are automatically
changed in the selected unit.
When setting the distance
• You can set the distance within the range of 0.0 ~ 9.0
meters in 0.3 meter intervals (or 0 ~ 30 feet in 1 feet
intervals).
When selecting the DISTANCE
Note :
• You cannot select the speakers set to "N (None or No)".
1. Press the CURSOR UP()/DOWN() buttons to select the DISTANCE, then press the ENTER button.
2. Press the CURSOR UP()/DOWN() buttons to
select the desired item.
3. Press the CURSOR LEFT()/RIGHT() buttons to
set the selected item as desired.
4. Repeat the above steps 2 and 3 until the distances are all set as desired.
About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital sources, etc., it is ideal that the center, surround and
subwoofer speakers should be the same distance from the main listening position as the front speakers. By entering the distance
between the listening position and each speaker, the delay times of center, surround and subwoofer speakers are automatically
adjusted to create an ideal listening environment virtually as if the center, surround and subwoofer speakers were at their ideal
locations respectively.