Filter
Top Products
ENGLISH
36
Repeat the above steps and until each level is adjusted as desired.
4
Each time these buttons are pressed, “” is moved to the
corresponding LFE level mode.
Each time these buttons are pressed, the LFE level can be
adjusted within the range of either -10~0 dB for Dolby
Digital program sources or -10~+10 dB for DTS and MPEG
program sources.
In general, we recommend the LFE level for Dolby Digital
program sources to be set at 0 dB and +10 dB for DTS
program sources.(However, the recommended LFE level for
some early DTS program sources is 0 dB.)
If the recommended levels seem too high, lower the setting
as necessary.
Press the CURSOR UP()/DOWN() buttons to select the LFE LEVEL CONTROL, then press the
ENTER button.
1
Press the CURSOR UP()/DOWN() buttons to select the desired LFE level mode.
2
Press the CURSOR LEFT()/RIGHT() buttons to adjust the selected LFE level as desired.
3
When selecting the LFE LEVEL CONTROL
DVD
VOL.
CH LEVEL
CH SEL
DSP
MODE
AUTO
ST
CENTER
MODE
TEST
TONE
DISC
P.SCAN
TUNER
CD
T1/MONAUX
PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISPSLEEP
DIRECT IN
ROOM2
INTRO
RETURN
B
RPT
A
7.1 SURR
TITLE
ENTER
HOME THEATER MASTER
RNC-220
DVD
VOL.
CH LEVEL
CH SEL
DSP
MODE
AUTO
ST
CENTER
MODE
TEST
TONE
DISC
P.SCAN
TUNER
CD
T1/MONAUX
PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISPSLEEP
DIRECT IN
ROOM2
INTRO
RETURN
B
RPT
A
7.1 SURR
TITLE
ENTER
HOME THEATER MASTER
RNC-220
DVD
VOL.
CH LEVEL
CH SEL
DSP
MODE
AUTO
ST
CENTER
MODE
TEST
TONE
DISC
P.SCAN
TUNER
CD
T1/MONAUX
PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISPSLEEP
DIRECT IN
ROOM2
INTRO
RETURN
B
RPT
A
7.1 SURR
TITLE
ENTER
HOME THEATER MASTER
RNC-220
ENTER
LFE LEVEL CONTROL
RETURN:Back , :Select
DOLBY
-----
+
0 dB
DTS
-----
+
-----
0 dB
MPEG
-----
+
-----
0 dB