Sherwood ASW-670 Home Theater System User Manual


 
48
ENGLISH
3
Press the CURSOR / buttons to set the hour for on time, press the CURSOR / buttons to set the minute
and press the SLEEP/TIMER button.
• Then is enters the off time setting mode.
4
Press the CURSOR / buttons to set the hour for off time, press the CURSOR / buttons to set the minute
and press the SLEEP/TIMER button.
• Then it enters the input setting mode.
Note :
• If the on time and the off time are the same, when the SLEEP/TIMER button is pressed, “ERROR” is displayed. In this case,
perform the above steps 3 and 4 to set the time correctly.
5
Press the CURSOR / buttons to select the desired input source and press the SLEEP/TIMER button.
• Then it enters the volume setting mode.
• Each time CURSOR
or buttons is pressed, the input source changes as follows : DVD FM AM
6
Press the CURSOR / buttons to adjust volume level as desired.
• Then the timer settings are memorized and it returns to
the previous status.
7
Press the SLEEP/ TIMER button for more than 2 seconds to memorize.
Continued