Sharp VC-MH715HM Speaker System User Manual


 
3
www.sharp.co.uk/support
BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
To fit the batteries into the remote control
Remove the battery cover on the back of the remote control.
Fit the batteries: to and to terminals. Place the
battery cover back into position.
CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT YOUR DEALER IF
ANY ARE MISSING.
(TYPE AA/R6/UM3)
BATTERIES (X2)
for the remote control unit.
RF CONNECTION CABLE
connects the VCR to the TV.
Remote Control
Remote Control must be pointed towards the VCR to operate.
Do not expose to liquid or shock.
May not function if the VCR is in direct sunlight or any other strong light.
Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
Remove the batteries and keep in a safe place if you do not plan to use
the VCR for several months.
Remove and dispose of flat batteries safely and promptly.
Incorrect use of batteries may cause them to leak or burst.
Battery cover
REMOTE
CONTROL
For a more
detailed
picture of
your remote
control refer
to page (ii).
TINS-A079UMN1.book Page 3 Monday, November 4, 2002 1:01 PM