Filter
Top Products
13
www.sharp.co.uk/support
BASIC OPERATION
HOW TO USE THE VIDEO Plus+
®
SYSTEM TO MAKE A
RECORDING (VC-MH715HM ONLY)
Before you start!
• If the Timer Standby symbol appears on the VCR
display, press the
TIMER ON/OFF button to
remove the symbol.
• Check that the VCR clock is displaying the correct time.
The VIDEO Plus+ system allows you to program the VCR to record up to eight programmes
using the PlusCode numbers published in TV listings (refer to your daily newspaper or TV
magazine).
1. Press the VIDEO Plus+ button on the
remote control.
2. Enter the PlusCode number from the TV
listing using the
NUMBER BUTTONS.
NOTE:
3.
Press the [ / ] menu select buttons to select
ONCE, WEEKLY, DAILY.
• If you want to make additional recordings at the same
time each day or week, then use
[/]to select the
WEEKLY, or DAILY option as appropriate.
4. Press the SET button to confirm.
NOTE:
The first time that you use the VIDEO Plus+ system
to make a recording on each channel Preset, (PR)
may be highlighted on the On-Screen Display.
5. Enter the channel number you wish to record
using the
NUMBER BUTTONS, for
example if you wish to record channel 2 press
0 2. The VCR will remember this for the future.
See next page to continue
• An ERROR message will appear if you have entered a number that is not a current
PlusCode number. If this happens press
CLEAR to delete the numbers as required
and enter the correct PlusCode number.
• Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR to return to the VIDEO Plus+ system menu, and re-enter the correct
PlusCode number.
→
PLUSCODE NO . -
ONCE WE EK L Y DA I L Y
VIDEO
Plus+
MENU SET
CLEAR
VIDEO
Plus+
DISPLAY
MODE OSD
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
ZERO
BACK
231
456
MENU
SELECT
BUTTONS
SET
1/2
DATE PR START STOP
21/06 02 12:00 13:00 SP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
PR :PRESET
ǡǠ :SELECT įĬ :CHANGE
SET :ENTER MENU:EXI T
REMOTE CONTROL
TINS-A079UMN1.book Page 13 Monday, November 4, 2002 1:01 PM