Filter
Top Products
25
www.sharp.co.uk/support
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
Connect your signal source (eg. Camcorder,
Digital Camera etc) to the desired scart socket
on the back of the VCR using the manufacturers
recommended cable (not supplied).
2.
Ensure that the tape on which you wish to record
is inserted into the VCR.
3.
Press
INPUT SELECT
on the remote
control until the VCR display shows
L2
.
4.
Press
REC
to start recording.
OTHER CONNECTIONS POSSIBLE!
• If you wish to record from a source connected to
LINE 1 IN/OUT, select
L1
.
Press
REC
to start recording.
• If you wish to record from a source connected
with audio phono leads to the sockets on the
front of the VCR (if fitted), select
L3
.
Press
REC
to start recording.
NOTE:
• There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
AERIAL
IN
ENTREE
ANTENNE
AERIAL
OUT
SORTIE
ANTENNE
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
AA013
LINE2(II)IN/DECODER CANAL PLUS/L2(II)
AUDIO OUT
SORTIE SON
L G
R D
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
AER
IN
ENTR
ANTE
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
INPUT SELECT
REW
FF
PLAY / X2
78
0
9
AM/PM
CHANNEL
➘
Input Select
TINS-A079UMN1.book Page 25 Monday, November 4, 2002 1:01 PM